Veröffentlichungen

Schüttguttechnik (allgemein)

[#110] D. Schulze: Pulver und Schüttgüter - Fließeigenschaften und Handhabung, 4th Edition, Springer (2019) (German). More information...

[#113] D. Schulze: Powders and Bulk Solids - Behavior, Characterization, Storage and Flow, 2nd Edition, Springer (2021) (English). More information...

Ringschergerät

[#47] D. Schulze: Entwicklung und Anwendung eines neuartigen Ringscherätes (Development and Application of a novel ring shear tester), Aufbereitungstechnik 35 (1994) 10, pp. 524-535 (German/English)

[#44] D. Schulze: A New Ring Shear Tester for Flowability and Time Consolidation Measurements, Proc. 1st International Particle Technology Forum, August 1994, Denver/Colorado, USA, pp. 11-16 (in English)

[#62] D. Schulze: Flowability and Time Consolidation Measurements Using a Ring Shear Tester, Powder Handling & Processing 8 (1996) 3, pp. 221-226 (in English)

[#63] D. Schulze: Vergleich des Fließverhaltens leicht fließender Schüttgüter, Schüttgut 2 (1996) 3, pp. 347-356 (in German)

[#70] D. Schulze: Measurement of Flow Properties of Particulate Solids in Food and Pharmaceutical Technology Using a New Automated Ring Shear Tester, PARTEC 98, Preprints "1st Europ. Symp. Process Technology in Pharmaceutical and Nutritional Sciences", 10.-12.3.98, Nürnberg, pp. 276-285 (in English)

[#80] M. Behres, C.-J. Klasen, D. Schulze: Entwicklung einer Scherzelle zur Messung der Wandreibung von Schüttgütern mit einem Ringschergerät, Schüttgut 4 (1998) 4, S. 467-472 (in German)

[#81] M. Behres, C.-J. Klasen, D. Schulze: Development of a Shear Cell for Measuring the Wall Friction of Bulk Solids with a Ring Shear Tester, Powder Handling & Processing 10 (1998) 4, S. 406-409 (in English)

[#89] D. Schulze, H. Heinrici, H. Zetzener: The Ring Shear Tester as a Valuable Tool for Silo Design and Powder Characterization, Powder Handling & Processing 13 (2001) 1, pp. 19-24 (in English)

[#117] D. Schulze: Ringversuch mit Ringschergeräten, Schüttgut 16 (2010) 3, pp. 146-153

[#118] D. Schulze: Round Robin Test on Ring Shear Testers, Advanced Powder Technology 22 (2011) 2, pp. 197-202

Lagern von Schüttgütern:

[#27] D. Schulze: Untersuchungen zur gegenseitigen Beeinflussung von Silo und Austragorgan, Dissertation TU Braunschweig 1991 (in German)

[#39] D. Schulze: Storage, Feeding, Proportioning, in: Chulia, D., Deleuil, M., Pourcelot, Y (Editors): Powder Technology and Pharmaceutical Processes, Handbook of Powder Technology Vol. 9, Elsevier Amsterdam - London - New York - Tokyo 1994, pp. 285-317 (in English)

[#61] D. Schulze: Silos - Design Variants and Special Types, Bulk solids Handling 16 (1996) 2, pp. 225-232 (in English, similar to #51)

[#51] D. Schulze: Möglichkeiten der Silogestaltung, Schüttgut 1(1995) 1, pp. 19-25 (in German, similar to #61)

[#40] D. Schulze, J. Schwedes: Bulk Solids Flow in the Hopper/Feeder Interface, Powder Handling & Processing 5 (1993) 4, pp. 341-348 (in English)

[#45] D. Schulze: The Prediction of Initial Stresses in Hoppers, Bulk Solids Handling 14 (1994) 3, pp. 497-503 (in English)

[#49] D. Schulze, J. Schwedes: An Examination of Initial Stresses in Hoppers, Chem. Engng. Sci. 49 (1994) 13, pp. 2047-2058 (in English)

[#58] J. Strusch, D. Schulze: Zur Gestaltung von Versuchssilos, Preprints "Silos - Forschung und Praxis", Conf. of SFB 219, Karlsruhe, March 1996, pp. 35-44 (in German)

[#65] D. Schulze, J. Schwedes, C. Leonhardt, J. Kossert: Schüttguttechnische Auslegung eines Silos zur Lagerung von 10.000 t Schwefel, Schüttgut 3 (1997) 3, pp. 299-305 (in German)

[#71] A. Kwade, D. Schulze: Proper Silo Design for Food Products - Today Strategies for Avoiding Segregation, Degradation and Hang-ups, PARTEC 98, Preprints "1st Europ. Symp. Process Technology in Pharmaceutical and Nutritional Sciences", 10.-12.3.98, Nürnberg, pp. 157-166 (in English)

[#72] D. Schulze: Feeders and Flow Promoting Devices, in: Silos - Fundamentals of Theory, Behaviour and Design, edited by C.J. Brown and J. Nielsen, publ. by E & FN Spon, London and New York (1998), pp. 200-220 (in English)

[#74] D. Schulze: Silo Quaking, in: Silos - Fundamentals of Theory, Behaviour and Design, edited by C.J. Brown and J. Nielsen, publ. by E & FN Spon, London and New York (1998), pp. 171-182 (in English)

[#81] D. Schulze: Lagern von Schüttgütern, in: Schüttguttechnik in der Kunststoffindustrie, Hrsg. VDI-Ges. Kunststofftechnik, Düsseldorf, VDI-Verlag (1998), pp. 25-50 (ISBN 3-18-234213-4) (in German)

[#90] A. Kwade, D. Schulze: Produktgerechte Auslegung von Silos in der Lebensmittelindustrie - Möglichkeiten zur Vermeidung von Entmischung, Abrieb und Fließproblemen, Schüttgut 7 (2001) 1, pp. 43-48 (in German)

[#92] A. Kwade, D. Schulze: Proper Silo Design for Food Products - Today Strategies for Avoiding Segregation, Degradation and Hang-ups, Powder Handling & Processing 13 (2001) 2, pp. 173-176 (in English)

[#99] D. Schulze: Anwendungen der Schüttguttechnik in der Lebensmittelindustrie, Schüttgut, Spezial "Lebensmittel", April 2003, pp. 10-14 (in German)

[#109] D. Schulze: Gasdrücke in Silos beim Füllen und Entleeren, Schüttgut 10 (2004) 6, pp. 462-469 (in German)

[#132] D. Schulze: Storage and Flow of Powders and Bulk Solids, in H.G. Merkus and G.M.H. Meesters (Editors): Production, Handling and Characterization of Particulate Materials, Springer, Particle Technology Series, Vol. 25 (2016), pp. 425–478

[#133] D. Schulze: Entmischung von Schüttgut: Ursachen und Lösungen (Segregation of bulk solids – causes and solutions), Zi Ziegelindustrie International Vol. 69 (2016) 1, pp. 25–31

[#134] D. Schulze: Segregation of bulk solids – causes and solutions, ZKG International Vol. 69 (2016) 1-2, pp. 34–38

Messen der Fließeigenschaften von Pulvern und Schüttgütern (allgemein):

[#75] D. Schulze: The Measurement of the Flowability of Bulk Solids, in: Silos - Fundamentals of Theory, Behaviour and Design, edited by C.J. Brown and J. Nielsen, publ. by E & FN Spon, London and New York (1998), pp. 18-52 (in English)

[#60] D. Schulze: Flowability of Bulk Solids - Definition and Measuring Techniques, Part I and II, Powder and Bulk Engineering 10 (1996) 4, pp. 45-61, and 10 (1996) 6, pp. 17-28 (in English)

[#50] D. Schulze: Zur Fließfähigkeit von Schüttgütern - Definition und Meßverfahren, Chem.-Ing.-Techn. 67 (1995) 1, pp. 60-68 (in German)

[#52] D. Schulze: Appropriate Devices for the Measurement of Flow Properties for Silo Design and Quality Control, PARTEC 95, Preprints "3rd Europ. Symp. Storage and Flow of Particulate Solids", 21.-23.3.95, Nürnberg, pp. 45-56 (in English)

[#41] A. Kwade, D. Schulze, J. Schwedes: Die direkte Messung des Horizontallastverhältnisses Teil 1 und 2, Beton- und Stahlbetonbau 89 (1994) 3, pp. 58-63 and 89 (1994) 4, pp. 117-119 (in German, similar to #43)

[#43] A. Kwade, D. Schulze, J. Schwedes: Determination of the Stress Ratio in Uniaxial Compression Tests Part 1 and 2, Powder Handling & Processing 6 (1994) 1, pp.61-65 and 6 (1994) 2, pp. 199-203 (in English, similar to #41)

[#48] D. Schulze: Schüttgüter der Umwelttechnik - Charakterisierung der Fließeigenschaften und Lagerung in Silos, Preprints "Charakterisierung fester Reststoffe und Abfälle", 3. Conference of the Ges. für Aufbereitungstechnik und Recycling e.V. (GAR), Freiberg, 9./10. November 1994, Freiberg/Sachsen, pp. 73-82 (in German)

[#66] D. Schulze: Die Charakterisierung von Schüttgütern für Siloauslegung und Fließfähigkeitsuntersuchungen (The Characterization of Bulk Solids for Silo Design and Flowability Tests), Aufbereitungstechnik 39 (1998) 2, pp. 47-57 (German/English)

[#87] D. Schulze: Zur Anwendung des effektiven Reibungswinkels, Schüttgut 6 (2000) 4, pp. 395-400 (in German)

[#89] D. Schulze, H. Heinrici, H. Zetzener: The Ring Shear Tester as a Valuable Tool for Silo Design and Powder Characterization, Powder Handling & Processing 13 (2001) 1, S. 19-24 (in English)

[#93] D. Schulze: Understanding and Measuring Powder Flowability, Powder & Bulk Engineering International 5 (2002) 3, S. 32-39 (in English)

[#94] D. Schulze, A. Wittmaier: Fließeigenschaften hochdisperser Schüttgüter bei kleinen Verfestigungsspannungen, Chem. Ing. Techn. 74 (2002) S. 1144-1148 (in German)

[#95] J. Schwedes, D. Schulze: Lagern von Schüttgütern, in: Schubert, H. (Ed.): Handbuch der Mechanischen Verfahrenstechnik, VCH-Wiley (2002), ISBN 3-527-30577-7 (in German)

[#96] D. Schulze: Fließeigenschaften von Schüttgütern mit faser- und plättchenförmigen Partikeln, Schüttgut 8 (2002) 6, pp. 538-546 (in German)

[#97] D. Schulze: Zeit- und geschwindigkeitsabhängiges Verhalten von Schüttgütern als Bedingung für Slip-Stick, Chem. Ing. Techn. 75 (2003) 1-2, pp. 104-108 (in German)

[#98] D. Schulze, A. Wittmaier: Flow properties of highly dispersed powders at very small consolidation stresses, Chem. Eng. Technol. 26 (2003) 2, pp. 133-137 (in English)

[#103] D. Schulze: Time and Velocity Dependent Properties of Powders Effecting Slip-Stick Oscillations, Chem. Eng. Technol. 26 (2003) 10, pp. 1047-1051 (in English)

[#107] D. Schulze: Ein neues Prinzip zur Messung der Fließeigenschaften von Pulvern und Schüttgütern, Schüttgut 10 (2004) 5, S. 369-377 (in German)

[#108] D. Schulze, A. Wittmaier: Flow Properties of Highly Dispersed Powders at Very Small Consolidation Stresses, in: Müller, E., Oestreich, C. (Eds.): Handling of highly dispersed powders, Schwerpunktprogramm der Deutschen Forschungsgemeinschaft, S. 276-283, Shaker-Verlag, Aachen (2004) (in English)

[#121] D. Schulze: Flow Properties of Powders and Bulk Solids, in: Solids Level Measurement and Detection Handbook, Momentum Press, LLC, New York (2012), pp. 171–201

[124] D. Schulze, H. Heinrici: How to deal with orientation-dependent wall friction, Proceedings 7th Intl. Conf. on Conveying and Handling of Particulate Solids (CHoPS), Friedrichshafen, 10.-13.9.2012, Paper no. 1084

[125] D. Schulze, H. Heinrici: Was tun bei richtungsabhängiger Wandreibung? Schüttgut 19 (2013) 2, pp. 94-98

[126] D. Schulze: Flow Properties of Solids, in: Encyclopedia of Pharmaceutical Science and Technology, 4th Edition (EPST4) (2013)

[127] D. Schulze: Shear testing of powders for process optimization, Annual Transactions of the Nordic Rheology Society, Vol. 21 (2013), pp. 99 – 106.